Skip to main content

How to Install a Shower Curtain Rod

Share This: %20-%20http://www.yliving.com/blog/shower-curtain-rod-install/" target="_blank">
Shower Curtain Rod%7C%20YLiving" target="_blank">

Functional and decorative, the shower curtain rod is an integral part to the common shower. When installing a new rod, you’ll have to decide on which type is best for your situation, and then take the necessary steps to install it properly. Here’s how to choose the right shower rod and how to hang it:

Shower Curtain Rod Options

When choosing the right shower curtain rod for your space, there are 3 main ones to consider: tension rods, fixed rods, and custom rods.

Tension

Tension rods are ideal for those that need a quick fix or are renting, as there isn’t any hardware involved since tension rods are wedged in place between two walls. While they’re an easy solution to a shower curtain-less shower, they aren’t secure and can fall out of place if tugged on. Tension rods can also damage drywall if they’re wedged too tightly without any stud support. To avoid this, it’s best to locate the studs to help brace the rod.

Fixed

Fixed rods are traditional shower curtain rods. They come in an array of styles and designs, and are relatively easy to install. They can be straight or curved, and they mount onto the wall using hardware, making them a more secure option.

Custom

Custom Rods are square, rectangular, oval, or d-type rods that are attached to the ceiling and encircle the tub space or attach to the walls for corner showers.

Installing a Shower Curtain Rod

Depending on which shower rod you choose, your installation will be different. But generally for this project, you’ll need the following:

Tape measure
Pencil
Stud finder
Shower curtain and rings
Tension rod or fixed rod and hardware
Drill and bits
Drywall anchors
Screwdriver

Installing a Tension Rod

Step 1

Start by measuring between the two walls with the tape measure. You need to purchase a tension rod that’s a couple inches longer than the actual length between the two walls.

Step 2

Start by opening or extending the rod by turning each of the ends in the opposite direction. Do this until the tension rod is 1-2 inches longer than the distance between the two walls and set aside.

Step 3

To measure the height for installation, take your shower curtain and hold it against one of the walls above the apron of the tub. Adjust the height of the curtain until its hem is sitting 6 inches below the edge of the tub. Use your pencil to mark the height of the curtain on the wall. Measure the height of the pencil mark and duplicate it on the opposite side of the shower.

Step 4

Slip the shower curtain rings onto the tension rod before installing.

Step 5

Wedge the tension rod into place, making sure to hold one end over the mark on one side of the shower while compressing the rod onto the other mark on the opposite side. Once the rod is in place, adjust it accordingly.

Installing a Fixed Shower Curtain Rod

Step 1

Mark the location for your curtain rod on either side of the shower walls.

Step 2

Using a stud finder, slowly slide it over your marked areas to see if there are studs behind the drywall. The device should beep or light up to indicate the presence of a stud behind each mark. If no stud is present, you’ll want to add support, so pre-drill holes for some drywall anchors before hanging the rod. If you’re working with a tiled wall, be sure that you pre-drill holes and insert wall anchor as well.

Step 3

Screw your drywall anchors into the pre-drilled holes and then secure the mounting hardware with screws into the wall anchors.

Step 4

Slide your shower curtain rings onto the curtain rod before you install your rod.

Step 5

Mount the shower rod into the rod holes and hang your curtain.

Share This: %20-%20http://www.yliving.com/blog/shower-curtain-rod-install/" target="_blank">
Shower Curtain Rod%7C%20YLiving" target="_blank">

Comments

Post a Comment

Popular posts from this blog

Prosecutor says two attackers stabbed NMSU student to death | Lubbock Online

ALBUQUERQUE {AP} Crime scene evidence suggests New Mexico State University student Carly Martinez struggled with two men before she was murdered, prosecutors told jurors at the trial of Jason Desnoyers. The 18-year-old student was driven to a remote Las Cruces mesa , was stabbed more than a dozen times in the head, chest, abdomen, back, thighs and buttocks, and her body was "left to rot" in the desert, District Attorney Susana Martinez said Tuesday. Two weapons were used, a single-edged knife and another instrument, said prosecutor Martinez , no relation to the victim. "Two weapons, two men," she said. Desnoyers, 24, is charged with first-degree murder, conspiracy, tampering with evidence and criminal solicitation. Co- defendant Jesse Avalos , 26, is to be tried separately in September on similar charges. Defense attorney Gary Mitchell contends there was only one weapon. He said Avalos wore a belt with a knife, screwdriver and other tools the night Carly Martin
Read more

How to Use a Wet Tile Saw: A Beginner’s Basic Guide

Image
If you are looking to redo your bathroom shower or tub surround, your kitchen backsplash , or even a laundry room floor , you are likely considering tile. As you’re likely aware, tile is a fantastic material to use for heavy-traffic, heavy-use, and watery areas. It can be an intimidating process if you’ve never attempted it before, so here is a beginner’s basic guide to using a tile wet saw. A tile wet saw is simple, fast, and the most efficient tool for tiling in general that’s out there. (Also, for more info, check out our tutorials for tiling a kitchen subway tile backsplash and tiling a shower/tub surround.) View in gallery View in gallery To begin, let’s look at the wet tile saw itself. The wet tile saw used in this guide is a small tabletop number . Familiarize yourself with the components; these are the names of parts we’ll use in this guide. View in gallery The lock plate can be moved from side to side to enable you to cut your tile to any distance (as long as it fits on your
Read more

Stay in a Tiny Shingled Cabin in Austria That Resembles a Bird-Like UFO

Image
Set on a hilly incline and designed by architects Peter and Lukas Jungmann, the cabin appears to hover above ground like some sort of alien object—a stark contrast to its pastoral environment and the traditional Austrian chalets that surround it.  Tiny Shingled Cabin in Austria That Resembles a Bird-Like UFO - Photo 1 of 11 -" /> Because of its irregular, otherworldly form, and how it seems to be suspended in midair, the cabin was named "Ufogel," which is a melding of the acronym UFO and "vogel," meaning bird in German.  Tiny Shingled Cabin in Austria That Resembles a Bird-Like UFO - Photo 2 of 11 -" /> Available for rent through Urlaubsarchitektur, Ufogel’s exterior is covered in rustic Austrian-style shingles, but its sharp angles and asymmetrical shape gives it a distinctly futuristic, nest-like look.  Tiny Shingled Cabin in Austria That Resembles a Bird-Like UFO - Photo 3 of 11 -" /> Within, the split-level, 485-square- foot space acc
Read more